Brother HL-2400C - Page 171

VI-6
Periodic Maintenance Cleaning Work
Table 6-3
No. Parts Name Cleaning Work Cleaning Cycle *1
Description Page (Condition or Case)
7 Transfer Drum
1.Remove the transfer drum.
2.Clean the dirt from the transfer drum
surface using a cloth.
1.2.7
• Defective image
• Periodic maintenance
8
Dustproof
Glass of
Scanner Unit
1.Remove the toner cartridges and the OPC
belt cartridge.
2.Remove the dust-proof glass.
3.Using a dry cloth and swab, clean the dirt
from the dust-proof glass.
1.2.8
• Defective image
• Periodic maintenance
9
Printer Interior
Unit
1.Remove the toner cartridges and OPC
belt cartridge.
2.Clean the printer’s base, using a toner
vacuum cleaner and dry cloth.
1.2.9
• Defective image
• Periodic maintenance
[Note] *1:If a periodic maintenance agreement has been made, checks will be made at every periodic maintenance
service to prevent any problems from occurring.
CAUTION
The register roller, paper guide, and paper exit roller should be cleaned every 20K prints. Failure to do so may cause paper
jams inside or outside of the printer.