Brother HL-2400C - Page 170

VI-5
Periodic Maintenance Cleaning Work
Table 6-3
No. Parts Name Cleaning Work Cleaning Cycle *1
Description Section (Condition or Case)
1 Register Roller
1.Open the transfer unit.
2.Clean roller and surrounding area using a
dry cloth.
1.2.1
• Defective image
• Smeared paper
• 20K prints
2 Paper Guide
1.Remove the media cassette from the
printer.
2.Clean the paper guide using a dry cloth.
1.2.2 20K prints
3
Paper Exit
Roller
1.Open the top cover.
2.Clean the paper exit roller using a dry
cloth.
1.2.3 20K prints
4 Transfer Roller
1.Open the transfer unit.
2.Clean roller and surrounding area using a
dry cloth.
1.2.4
• Defective image
• Smeared paper
• Periodic maintenance
5
Paper
Discharging
Roller
1.Open the transfer unit.
2.Remove the paper discharger unit.
3.Clean the corona wire and case, using a
cotton swab.
1.2.5
• Defective image
• Paper jam
• Periodic maintenance
6
OPC Belt
Cartridge
1.Remove the OPC belt cartridge.
2.Clean up spilt toner around the OPC belt
cartridge and cleaning blade.
3.Clean the charger unit.
1.2.6
• Defective image
• Periodic maintenance