Brother HL-2400C - 3 Paper Transport Error; Feed Jam

VIII-8
3. PAPER TRANSPORT ERROR
Paper is transported through the path shown in Fig.8-1. Paper jams at the following
locations are easily cleared.
•
Paper Feeding Roller
•
Fusing Unit
•
Transfer Unit
•
Paper Exit Unit
K
Y
M
C
Fig.8-1
3.1 Feed Jam
Table 8-3-1
Problem Item Step Check Item Result Action
1
Is the print paper a
recommended paper?
NO
Use a recommended
paper.
Print Paper
2 Is the print paper damp? YES
Replace the existing
paper with new.
3
Was the paper fanned before
loading in the media cassette?
NO
Fan the paper before
loading.
4 Is the print paper set in place? NO
Set the paper in the
correct place.
Media
Cassette
5 Is the end plate properly set up? NO
Set the end plate to
meet the paper size.
6
Is the paper stacked above the
line on the paper guide?
YES
Stack the paper below
the line.
7
Is there paper dust around the
paper guide?
YES
Clean the paper guide
with a cotton cloth.
Pick-up Roller
8
Is the print paper caught in the
paper feeding part?
YES Remove the paper.
/ Separation
Pad 9 Is the pick-up roller damaged? YES
Service call required to
replace the damaged
pick-up roller.
Fusing Unit
Oil Bottle
Paper Exit Roller
Drum Cleaner
OPC Belt Cartridge
Top Cover
Toner Cartrid
g
e
Media
Cassette
Paper Feedin
g
Roller
Register Roller
Transfer Roller
Paper dischar
g
er Unit
Transfer Unit
Paper Exit Unit
Transfer Drum