Brother HL-2400C - Page 253

VIII-7
Display Message Meaning
Countermeasure
14 CHK CLEANING
ROLLER
Change the fuser
cleaner
Replace with a new fuser
cleaner
15 MISPRINT
PAPER/PRREQ/MEDIA
Misprinting occurred
Confirm status of media
cassette.
Confirm correct paper size.
Confirm consistency of
media.
16 ALIGN TONER CG
Y/M/C/K
Toner cartridge not
installed
Confirm the installation of the
toner cartridge(s).
16 ALIGN FU UNIT
Fusing unit not
installed
Remove the fusing unit and
refit it. Confirm it is correctly
installed.
16 ALIGN BELT CG
OPC belt cartridge not
installed
Confirm the installation of the
OPC belt cartridge.
17 MEDIA JAM FEED
Paper jam at feeding
area
Remove the media cassette,
and remove paper jammed at
feeding entrance.
17 MEDIA JAM INNER
Paper jam inside
printer
Open the transfer unit, and
remove paper jammed inside.
17 MEDIA JAM OUTER
Paper jam at paper
exit area
Open the transfer unit / paper
exit unit and remove paper
jammed inside.
17 MEDIA JAM DRUM
Paper jam wound
around the transfer
drum
Open the transfer unit and
remove the OPC belt
cartridge. Remove the paper
jam by unwinding the paper
from the transfer drum.
18 CLOSE PANEL
FRONT/TOP
Covers open
Confirm that the covers are
firmly closed.
18 CLOSE TR UNIT
Transfer unit open
Confirm that the transfer unit
is firmly closed.
19 SLEEP MODE
Printer under idling
condition
Printer automatically returns
to the operating condition
when a PRINT signal is sent.
01 WAIT
Printer warming-up
00 READY
Printer ready to print
in standby status
These are normal operation
modes.
02 PRINT
Printing in progress