III-6
5) Install the new OPC belt cartridge into
the guides at both sides in the printer.
Fig.3-6
6) Set the belt cartridge lock lever at both
sides (left and right).
Fig.3-7
3.2 Install the Toner Cartridges into the Printer
1) Rock each of the cartridges 3 to 4 times
through 30
o
to the horizontal.
Fig.3-8
2) Remove the tape fixing the protective
cover and remove the protective cover
from the new toner cartridge.
Fig.3-9
3) Install the new toner cartridge along the
guide into the printer.
Fig.3-10
30
o
30
o
Protective
cover
To Next Page
Loading...
