V-26
39 FACTORY MODE
This mode consists of 9 (nine) modes for the confirmation of operation and the resetting
functions necessary for maintenance work.
CAUTION
Before using this mode, ensure that you have the information available to reset the Page
and Image counters to the correct values. See 34 TOTAL PAGES and 35 EACH IMAGE
for information on how to get the readings before starting working with these functions.
Basic Configuration
39 FACTORY MODE 40 DP CHECK
41 BD CHECK
42 FU CHECK
43 MARGIN ADJUST
44 LIFE PERIOD SET
45 NVRAM TUNE UP
46 NVRAM INITIAL
47 TOTAL PAGE SET
48 EACH IMAGE SET
To Next Page
Loading...
