VII-31
7) Remove the set screw M4X6 (1 pc.) complete with the shakeproof washer to release
the earthing harness.
8) Remove the power outlet from the frame.
Fig.7-50
9) Remove the set screws ST3X6 (2 pcs.) from the power supply unit frame.
10)Remove the power supply unit complete with the frame.
Fig.7-51
WARNING
The earthing wire is very important for the safety of users.
Upon replacement of the power supply unit, confirm that the earthing wire (green and
yellow color) is securely connected to the connector, the shakeproof washer is fitted
and the screw is tightly fastened.
Power outlet
Power Supply Unit
To Next Page
Loading...
