VIII-4
Display Message Meaning Countermeasure
T1 MANUAL FEED
***** SIZE
Request to load paper
manually. (The
message appears
alternately to show a
particular size.)
Load the requested size of
paper into the standard
media cassette and press the
Select button.
19 CHECK FONT
An error occurred in
the optional font card.
Turn off the printer, and
reinstall or replace the
optional font card.
20 FONT REMOVAL
Font card removed
while the printer is on-
line.
Turn off the printer, re-install
the font card, and turn on the
printer. The Continue button
will allow you to temporarily
ignore this message.
22 WASTE TONER
Waste toner pack full
of toner
Replace with a new one.
23 OIL EMPTY
No oil in the oil bottle Replace with a new one.
24 CHANGE FCR
Change the fuser
cleaner.
Replace with a new one.
25 NO FUSER UNIT
Fusing unit not
installed
Remove fusing unit and then
refit it. Confirm correctly
installed and clamped.
27 NO OPC BC
OPC belt cartridge not
installed
Remove the OPC belt
cartridge and then refit it.
Confirm correctly installed
and locked.
28 NO FC ROLLER
Fuser cleaner not
installed
Remove fuser cleaner and
then refit it. Confirm correctly
installed and clamped.
72 CHANGE FILTER
Change the ozone
filter.
Replace with a new one.
TONER LOW XXXX
The toner of the color
indicated by XXXX is
nearly empty.
Replace the toner cartridge
which has nearly run out.
FUSER OIL LOW
Oil in the oil bottle is
almost empty.
Replace with a new one.
REPLACE FCR
Change the fuser
cleaner.
Replace with a new one.
REPLACE OPC BC
Change the OPC belt
cartridge.
Replace with a new one.
REPLACE FUSER
Change the fusing
unit.
Replace with a new one.
REPLACE 120K KIT
Change the drum
cleaner, paper
discharger and
transfer roller.
Replace with new ones.
REPLACE FILTER
Change the ozone
filter.
Replace with a new one.
To Next Page
Loading...
