Brother HL-2400C - Page 54

IV-5
<Structure of the OPC Belt>
The OPC belt consists of a surface layer having a photoconductor (OPC) of organic
material, the inner layer of an insulator material (PET / Mylar) and an aluminum deposit
layer in between. The OPC belt is located as shown in Fig.4-5 as the main part of the
print system.
K
Y
M
C
Fig.4-5
Fig.4-6
OPC Belt Cartrid
g
e
Toner Cartrid
g
e
OPC Belt
Transfer Drum
Scanner Unit
Electrode
Photoconductor
(
OPC
)
Aluminum deposit layer
Insulator Material