IV-31
(2) Motors (Refer to Fig.4-30.)
No. Name Code Function
1 Main Motor MM
To drive the OPC belt and the paper
transport system.
2 Developing Motor DM
To drive the toner cartridge and the
developing system.
3 Scanner Motor SCM To scan the laser beam
4 Ozone Fan Motor OZFAN
To exhaust the ozone from the printer
(charger unit).
5 Heater Fan Motor HTFAN To exhaust the heat of the fusing unit.
6 Controller Fan Motor CTLFAN
To exhaust the heat of the power
supply unit and Interface Controller.
Fig.4-30
4. Ozone Fan
5. Heater Fan
3. Scanner Motor
Front cover SW
2. Developing Motor
1. Main Motor
Rear access
cover SW.
6. Controller
Fan
Top cover SW.
To Next Page
Loading...
