IV-37
(1) Control Block Diagram (Refer to Fig.4-33.)
No. Name Function
1 Sequence Control
To control the sequence of printer
operations.
2 Temperature Control
To control the temperature of the fixing
unit.
3 Toner Empty Sensing Control
To detect the toner empty status of each
toner cartridge.
4 Control Panel Control
To control the control panel indications
and the operational signals.
5 Error Processing Control
To sense errors occurring in the printer
and control the stop procedures.
6 Interface Control
To control the receipt and transmission of
the interface signals from the external
controller.
7 Laser Control To control laser scanning and laser power.
To Next Page
Loading...
