Brother HL-L3210CW - Page 7

Confidential
v
1.3.2 Transition to shipping state (Function code 03)................................................. 5-5
1.3.3 Monochrome print quality test pattern (Function code 09) ................................ 5-7
1.3.4 Set worker switches (WSW) and
print worker switch setting data (Function code 10, 11) .................................... 5-8
1.3.5 Check LCD operation (Function code 12) ....................................................... 5-11
1.3.6 Check control panel key operation (Function code 13) ................................... 5-13
1.3.7 Display software version (Function code 25)................................................... 5-14
1.3.8 Check sensor operation (Function code 32).................................................... 5-15
1.3.9 Display LAN connection status (Function code 33).........................................5-17
1.3.10 Change USB No. return value / Switching dither pattern / Switching of timing to
execute auto registration / Adjust left-end print position / Adjust upper-end print
position / Change of the transfer current setting / Change of ghost reduction
setting / Change of function switch / Change of drum developing bias correction
value in endurance deterioration of drum / Switching of black toner discharge
compensation (Function code 45) ................................................................. 5-18
1.3.11 Adjust printable range for each speed level (Function code 46).................... 5-25
1.3.12 Check consumables function (Function code 57)
(Models with cartridge sensor only)............................................................... 5-27
1.3.13 Adjust touch panel (Function code 61) .......................................................... 5-30
1.3.14 Adjustment of color registration
(Adjustment of inter-color position alignment) (Function code 66) ................ 5-31
1.3.15 Continuous print test (Function code 67).......................................................5-35
1.3.16 LED ASSY test pattern print (Function code 68) ........................................... 5-39
1.3.17 Print frame pattern (1-sided printing) (Function code 69).............................. 5-40
1.3.18 Print frame pattern (2-sided printing) (Function code 70).............................. 5-41
1.3.19 Color test pattern (Function code 71) ............................................................ 5-42
1.3.20 Sensitivity adjustment of density sensor (Function code 72)......................... 5-45
1.3.21
Continuous adjustments of density / registration sensor (Function code 73) ... 5-46
1.3.22 Configure for country/region and model (Function code 74) ......................... 5-47
1.3.23 Print maintenance information (Function code 77)........................................ 5-49
1.3.24 Check fan operation (Function code 78) ....................................................... 5-51
1.3.25 Display machine log information (Function code 80)..................................... 5-52
1.3.26 Display machine error code (Function code 82)............................................ 5-56
1.3.27 Developing bias voltage correction (Function code 83)................................. 5-57
1.3.28 Reset counters for consumable parts (Function code 88)............................. 5-58
1.3.29 Quit maintenance mode (Function code 99) ................................................. 5-58