2-10
Confidential
Error
Code
Description
Reference
Page
50 Failed to detect that the purge cam switch is turned ON. 2-36
52 Cannot detect the home position of the purge cam. 2-36
5A Abnormal stopping of the purge cam 2-36
5B The maintenance unit pump abnormally stopped during exhaust/intake. 2-36
5D
Overcurrent protection was activated in the driver IC during purge cam
operation.
2-36
5E
Overcurrent protection was activated in the driver IC during maintenance unit
pump operation.
2-36
6A The ASF encoder sensor cannot detect the rotation of the ASF motor. 2-37
6C Overcurrent protection was activated in the driver IC of the ASF motor. 2-37
6F ASF motor cannot stop. 2-37
75 Head capping does not work normally. 2-38
76 Head uncapping does not work normally. 2-38
7A The cap cam abnormally stopped during capping. 2-38
7B The cap cam abnormally stopped during uncapping. 2-38
7D Overcurrent protection was activated in the driver IC during capping. 2-38
7E Head property information not input 2-39
80
Recording paper size error (during fax/list printing)
The paper width sensor detected a recording paper smaller than the specified
size.
2-39
81
Recording paper size error (during operations other than fax/list printing)
The registration sensor and paper width sensor detected a recording paper
smaller than the specified size.
2-40
82
Recording paper jam
The paper width sensor could not detect the leading edge of recording papers.
2-41
84
Recording paper jam
The registration sensor stays in paper-feeding state even after completing paper
ejection.
2-42
89
The paper width sensor could not detect the home position specified on the
paper feed roller.
2-42
8A The PF encoder sensor cannot detect the rotation of the paper feed motor. 2-43
8C
Overcurrent protection was activated in the driver IC during paper feed motor
operation.
2-43
8F The PF encoder sensor cannot detect the rotation of the paper feed motor. 2-43
90 The disc tray collided with an obstacle at the back of the machine. 2-44
91 The pressure roller sensor detected a pressure roller release failure. 2-45
92 The pressure roller sensor detected a pressure roller depression failure. 2-45
93
The paper width sensor detected that there is no disc loaded on the disc tray. Or,
the size of the disc loaded is 130 ø or more, or 110 ø or less.
2-45
To Next Page
Loading...
Need help?
General
Weight and Dimensions
