2-54
Confidential
â– Error code 6101
The toner sensor detected that no toner cartridge (Black) was set.
Error code 6102
The toner sensor detected that no toner cartridge (Yellow) was set.
Error code 6103
The toner sensor detected that no toner cartridge (Magenta) was set.
Error code 6104
The toner sensor detected that no toner cartridge (Cyan) was set.
< User Check >
- Re-insert the toner cartridge.
â– Error code 6200
The current value between the CHG and GRID terminals and the toner sensor detected that
there were no toner cartridges of any colors and detected that the drum unit was not set.
< User Check >
- Re-insert the drum unit.
No Toner
Open the Front Cover, then install Toner Cartridge. Black (BK).
No Toner
Open the Front Cover, then install Toner Cartridge. Yellow (Y).
No Toner
Open the Front Cover, then install Toner Cartridge. Magenta (M).
No Toner
Open the Front Cover, then install Toner Cartridge. Cyan (C).
Step Cause Remedy
1
Toner sensor failure Replace the toner/new sensor PCB ASSY.
2 Main PCB failure Replace the main PCB ASSY.
No Drum Unit
Install the Drum Unit.
Step Cause Remedy
1
Dirt on the GRID terminals of the
main body and drum unit
Clean the GRID terminals of the main
body and drum unit.
(Refer to
Fig. 2-7 (P2-55)
,
Fig. 2-8 (P2-55)
.)
2
Dirt on the terminal of the
high-voltage power supply PCB
Clean the terminal of the high-voltage
power supply PCB.
3
High-voltage power supply PCB
failure
Replace the high-voltage power supply
PCB ASSY.
4
Toner sensor failure Replace the toner/new sensor PCB ASSY.
5
Main PCB failure Replace the main PCB ASSY.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
