Brother MFC MFC-9120CN User Manual

144
Drums End Soon The drum units are near the end
of their life.
Buy new drum units before you get a
Replace Drums message.
Drum End Soon(X)
1
The drum unit for the colour
indicated on the LCD is near the
end of its life.
Buy new drum unit for the colour indicated on
the LCD before you get a
Replace Drum(X)
1
message.
DR mode in Use
(except New Zealand)
The machine is set to Distinctive
Ring mode. You can not change
the Receive Mode from Manual to
another mode.
Set Distinctive Ring to off.
For Austlaria, see Telstra
®
FaxStream
®
Duet
®
(Distinctive Ringing) on page 52.
For Other countries, see Distinctive Ringing
(For Singapore and Hong Kong) on page 56.
Faxability On
(For New Zealand)
The machine is set to Faxability
mode. You can not change the
Recieve Mode from Manual to
another mode.
Set Faxability to off.
See FaxAbility on page 54.
Fuser Error The temperature of fuser unit
does not rise at a specified
temperature within specified time.
Turn the power switch off, wait a few
seconds, and then turn it on again. Leave the
machine for 15 minutes with the power on.
The machine can be turned off for up to
60 hours without losing faxes stored in the
memory. (See Transferring your faxes or Fax
Journal report on page 148.)
The fuser unit is too hot.
Init Unable XX
(XX=Error Code)
The machine has a mechanical
problem.
 Disconnect the machine from the power
for several minutes, then reconnect it.
(The machine can be turned off for up to
60 hours without losing faxes stored in
the memory. See Transferring your faxes
or Fax Journal report on page 148.)
 If the problem continues, call Brother
Customer Service.
Jam Inside The paper is jammed inside the
machine.
(See Paper jams on page 150.)
Jam Rear The paper is jammed in the back
of the machine.
(See Paper jams on page 150.)
Jam Tray The paper is jammed in the paper
tray of the machine.
(See Paper jams on page 150.)
No Belt Unit The belt unit is not installed
correctly.
Re-install the belt unit. (See Replacing the
belt unit on page 177.)
Error Message Cause Action

Brother MFC MFC-9120CN Specifications

General

Print Technology	Laser
Connectivity	USB 2.0, Ethernet
Duplex Printing	Manual
ADF Capacity	35 sheets
Fax Modem Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Maximum Printing Speed (Black)	17 ppm
Maximum Printing Speed (Color)	17 ppm
Monthly Duty Cycle	Up to 30, 000 pages
Scanning Resolution	Up to 19200 x 19200 dpi (interpolated)
Optical Scan Resolution	1200 x 2400 dpi
Memory	64 MB
Paper Handling	250-sheet input tray
Scanner Type	Flatbed
Copy Speed	Up to 17 cpm
Paper Capacity	250 sheets
Print Speed	Up to 17 ppm (Black/Color)