Bruker VANTEC-1 User Manual

Hardware Installation for the D4 ENDEAVOR VÅNTEC-1 Detector User Manual
5 - 4 M88-E01072
6. Mount the controllers into the rack and con-
nect the components as shown in Figure
4.3.
The cabling of the VÅNTEC-1 inside the radia-
tion safety box is shown in Figure 5.2 through
Figure 5.4.
Figure 5.2 - Fix the spring to the ceiling with Loctite 422
Figure 5.3 - Fix the cables as shown

Bruker VANTEC-1 Specifications

General

Brand	Bruker
Model	VANTEC-1
Category	Security Sensors
Language	English