131
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
Related topics
Modifying the Basic DSL Port Template Parameters (on page 131)
Modifying the Advanced DSL Port Template Parameters (on page 135)
Modifying the Power Spectral Density (PSD) DSL Port Template Parameters (on page 139)
Modifying the Basic DSL Port Template Parameters
Modifies the basic parameters for a DSL Port template that can be applied to a xDSL port,
replacing the xDSL port settings.
Parameters
You can provision the following for the basic parameters of an xDSL port template:
Parameter Description Valid Options
Admin State Service state of the xDSL port. enabled-no-alarms ‡,
enabled, disabled
Interface Name of DSL bonded interface of which to add this port as a
DSL GoS Profile Index of DSL Grade of Service (GoS) profile to use for performance
monitoring (PM) on the port.
The ID number (and description) of a defined GoS profile. GoS
profiles define performance monitoring counter thresholds. To apply
a Grade of Service profile, select a profile ID from the list. You can
apply the default Grade of Service profile defined by the Standards,
apply a custom profile, or disable reporting of threshold crossing
alerts.
To take effect, the GOS feature must also be enabled.
DslPortGos: 1 ‡, any
existing GoS profile
Ethernet GoS Profile Index of Ethernet GOS profile to use. EthPortGOS: 1 ‡
To Next Page
Loading...
Need help?
General
