Calix E3-48C User Manual

181
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
If necessary, see the complete set of parameter descriptions in the following topics:
 Basic xDSL Port Parameters (on page 131)
 Advanced xDSL Port Parameters (on page 135)
 Power Spectral Density (PSD) xDSL Port Parameters (on page 139)
To apply a DSL Template to a port
You can modify multiple parameters with a single action of applying a DSL template to the
port, replacing the DSL port settings.
1. On the Navigation Tree, click the xDSL port on which you want to apply the DSL
template.
2. Click Provisioning > Basic > Action > Apply Template.
3. In the Template list, select from the list of previously-created DSL templates.
4. Click Apply Template.
For CLI:
apply dsl-template <t-name> to-dsl-port <port>
To modify the xDSL parameters to recommended values
1. On the Navigation Tree, click the xDSL port of which you want to modify parameters.
2. In the Workarea, click Port > Provisioning > Basic.
3. Refer to the table above for the parameter descriptions and options and set the values as
necessary.
4. Click Apply.
5. In the Workarea, click Port > Provisioning > Advanced.
6. Refer to the table above for the parameter descriptions and options and set the values as
necessary.
7. Click Apply.
For CLI:
set dsl-port <port-id> advanced
set dsl-port <port-id> basic
set dsl-port <port-id> psd
show dsl-port [port]
[advanced|all|basic|inventory|psd|status|subcarriers]

Calix E3-48C Specifications

General

Brand	Calix
Model	E3-48C
Category	Wireless Access Point
Language	English