177
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
Step 3. Configure Subscriber Services
This section describes how to configure various VDSL2 services, using the previously-
created profiles and configured uplinks.
Topics Covered
This section covers the following topics in bold that are part of the overall VDSL2 services
configuration process:
1. Configure network uplinks for VDSL2 services
2. Creating system profiles that support VDSL2 applications
3. Configure subscriber services
Configuring Data Services
Configuring Video Services
Configuring Voice Services
Configuring T1/E1 PWE3 Services
Configuring Data Services
This section describes how to create data services on xDSL ports.
Topics Covered
This section covers the following topics in bold that are part of the overall E-Series VDSL2
services configuration process:
1. Configure network uplinks for VDSL2 services.
2. Create profiles that support VDSL2 applications.
3. Configure data subscriber services.
An overview of the VDSL2 data services provisioning
Configuring an xDSL port and interface for service
Configuring a data service
Overview: Configuring xDSL Data Services
The E-Series provides data interconnection between Internet service providers and
subscribers via the VDSL2 card ports. Service profiles and service tag actions in the E-Series
help provide tiered service offerings by specifying the priority and marking of packets from
the subscriber port into the service VLAN.
To Next Page
Loading...
Need help?
General
