225
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
E-Series Line Card Additional Status
Descriptions
The table below shows the possible states for an E-Series line card Additional Status.
Line Card Additional Status
default-prov Indicates that the object's parameters have never been changed
child-prov Indicates that the object has subtending records provisioned. these
may be ports or interfaces that have been updated by the user.
Indicates that the object is present.
system-disabled Indicates an object has a service affecting alarm reported against it,
or any of its parents.
For example:
ï‚Ÿ An ONT parent is the system object.
ï‚Ÿ A Card parent is the shelf, and then the system.
user-disabled Indicates an object is disabled by the user (Admin status =
degraded Indicates an object (ONT or a Card) has a non-service affecting
alarm reported against it.
active Indicates that the card is the system controller which manages
alarms, configuration, and performance monitoring. A "*" is shown
next to the card label in the web interface and in the CLI
show
Indicates the card is in standby status.
Note: If the card has the default-prov state and does not have the child-prov state, this
indicates that the card hierarchy is completely default and will be deleted from the database
upon card departure.
To Previous Page
Loading...
Need help?
General
