171
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
Apply a TDM gateway profile when you create a TDM voice service on an ONT POTS port.
For CLI:
create tdm-gw-profile <p-name> [server-ip]
delete tdm-gw-profile [p-name]
set tdm-gw-profile <p-name> [server-ip]
show tdm-gw-profile [p-name] [services]
Creating a TDM Gateway Service Group
For C7 TDM Gateway service, you must configure the SIP voice concentration group (SIP
VCG) on the C7 network and add a VoIP connection to the E-Series. For details, see the
Calix C7 VoIP Services Guide. For details, see the Calix C7 VoIP Services Guide. If you use CMS
to provision a C7 TDM Gateway service, you can specify the CSIP VCG in a TDM Gateway
Service Group that is referenced when you activate the service.
This topic describes how to create a TDM Gateway Service Group that defines the C7
network and interface groups used for delivering the TDM Gateway service, allowing CMS
to automatically create and validate C7 gateway cross-connects.
Note: The E7 GPON only supports a single VoIP Interface Group for 700GE, 700GX and
760GX, although the GX ONTs support multiple VoIP IP Hosts.
Parameters
You can provision the following parameters for TDM Gateway service groups:
Parameter Description Valid Options
ID* Index of the TDM Gateway service group. Any value between 1-1000, inclusively.
Description Unique name that indicates the entire description of the
C7 network and Calix C7 gateway interface group used
for this TDM service group. This value is auto-filled once
the network name and interface groups are selected.
String text
If left blank, the system automatically
enters the combination of names for the
To Next Page
Loading...
Need help?
General
