Calix E3-48C User Manual

59
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
 Ethernet and xDSL ports:
 Circuit-ID options:
 Calix-format: <system-ID> eth <shelf>/<slot>/<port>:<Vlan-Id>[-<Vlan-
Id>]
 TR-101-format: <system-ID> <iftype>
<shelf>/<slot>/<tr101port>:<cetag>[-<tag-Id>]
♦ The TR-101 iftype should be either “eth” or “atm” (must be all lower case).
♦ The TR-101 cetag should be one of 3 formats:
:vpi.vci for DSL lines/groups that are trained in ATM mode (tagged or
untagged)
:ce-vlan-id for tagged subscribers that are either PTM DSL lines/groups or
ONT
Null for untagged subscribers that are either PTM DSL lines/groups or ONT
 Calix-format-2: <system-ID>:<shelf>/<slot>/<port>
Note: If the xDSL port is a member of a bonded link group, the port within the xDSL
bonded link group with the lowest port value will be selected to fill the <port> field in
the Circuit-ID string.
 Remote-ID options:
 Subscriber ID of the port on which the DHCP lease request is received. The first
64 characters of the Subscriber ID text field are inserted.
 none (no content is inserted)
 E7 GPON ONT Ethernet ports:
 Circuit ID options:
 Calix-format: <system-ID> eth
<shelf>/<slot>/<port>/<OntID>/<Ontport>:<Vlan-Id>[-<Vlan-Id>]
 TR-101-format: <system-ID> eth
<shelf>/<slot>/<port>/<OntID>/<Ontport>:<cetag>[-<tag-Id>]
 Calix-format-2: <system-
ID>:<shelf>/<slot>/<port>/<OntID>/<Ontport>/
 Remote-ID options:
 ONT FSAN serial number, which is the default, specified in the "gpon-system-
default" profile.
 Subscriber ID of the port on which the DHCP lease request is received. For
ONT VoIP hosts, the subscriber ID of the ONT is used. In both cases, the first
64 characters of the Subscriber ID text field are inserted.
 none (no content is inserted)

Calix E3-48C Specifications

General

Brand	Calix
Model	E3-48C
Category	Wireless Access Point
Language	English