Canon DC22 - Page 82

• When you are using a DVD-RW disc as the
source disc, if the tray of a DVD drive other than
that selected
in step 5 opens when you need to
insert the target disc, some recordings
on the
source disc may
be lost. Click on "Cancel" and
restart the computer.
Transferring Still Images - Direct
Transfer
With the supplied USB cable and Digital
Video Software, you can transfer still
images to a computer by simply pressing
the
~ ~ (print/share) button.
Preparations
The first time you connect the camcorder
to the computer, you need to install the
software and set the auto-launch setting.
From the second time on, you will only
need to connect the camcorder to the
computer to transfer images.
1 Install the supplied Digital Video
Software.
See Installing the Software in the
Digital Video Software instruction
manual (electronic version on PDF
file).
2 Set the camcorder to (pI.Ay·a)
mode.
3 Connect the camcorder to the
computer using the USB cable.
See Connecting the Camcorder to a
Computer in the Digital Video
Software
instruction manual
(electronic version on PDF file).
4 Set the auto-launch setting.
• See Starting CameraWindow
(Windows) or Auto-downloading
(Macintosh) in the Digital Video
Software
instruction manual (electronic
version
on PDF file).
• The direct transfer menu appears on
the camcorder screen and the
~ ltV'
button lights up.
o IMPORTANT
• Correct performance cannot be guaranteed
for discs recorded on another digital device and
inserted
in this camcorder.
• When the DISC or CARD access indicator is
on or flashing do not perform the following
actions. Doing so may result
in permanent data
loss.
- Do not subject the camcorder to vibrations or
strong impacts.
- Do not open the disc cover/memory card slot
cover and do not remove the disc or memory
card.
-
Do not disconnect the USB cable.
- Do not turn off the camcorder or the computer.
-
Do not change the position of the .,. /0
switch or the operating mode.
• Operation may not work correctly depending
on the software and the specifications/settings
of your computer.
• If you wish to use the image files on your
computer, make copies
of them first, and use
the copied file, retaining the original.
• During the following operations, even if you
connect the camcorder to the computer it will
not be recognized.
- Protecting the disc
- Initializing the disc
- Finalizing or Unfinalizing the disc
- Erasing all still images from the disc or card
- Copying still images between the disc and
card
- Erasing all transfer orders
- Erasing all print orders
CD NOTES
• We recommend powering the camcorder
using the compact power adapter while it
is
connected to the computer.
• Refer also to the computer's instruction
manual.
• Users of Windows XP and Mac OS
X:
Your camcorder is equipped with the standard
Picture Transfer Protocol (PTP) allowing you to
download still images (JPEG only) by simply
connecting the camcorder to a computer via
USB cable without installing the software from
the DIGITAL VIDEO SOLUTION DISK.