Trouble?
.......
-----------------------------
Memory
Card
Operation
Problem
Solution
OJ
Memory card cannot be
Memory card was not facing the correct direction. Turn the 24
inserted.
memory card over and reinsert
it.
Memory card cannot be
Memory card is full. Erase still images to free some space or
67
recorded.
replace the memory card.
Memory card was not initialized. Initialize the memory card.
70
The folder and file numbers have reached their maximum value. 42
Set [FILE NOS.] to [RESET] and insert a new memory card.
Memory card cannot be played
Insert a memory card.
24
back.
Set the camcorder to
(PI.AY~aj
. 35
Make sure the memory card is selected as the media for still 32
images.
Image cannot be erased.
Image is protected. Cancel the protection.
69
"
[]
" flashes
in
red.
Card error occurred. Turn off the camcorder. Remove and
70
reinsert the memory card. Initialize the memory card if flashing
persists.
Printing
Problem
The printer
is
not operating
even though the camcorder
and printer are correctly
connected.
List
of
Messages
Solution
1.
Set the camcorder to
(PLAy-a)
.
2.
Disconnect and reconnect the USB cable.
3.
Turn off the printer and turn it back on.
OJ
Message
Explanation
OJ
SET THE TIME ZONE,
You
have not set the time zone, date and time. This message
28
DATE AND TIME
appears each time you turn the power
on
until you set the time
zone, date
.and
time.
CHANGE THE BATTERY Battery pack
is
exhausted. Replace or charge the battery pack.
21
PACK
TEMPERATURE TOO
The
camcorde~
has exceeded its operational temperature.
-
HIGH CANNOT RECORD Disconnect the compact power adapter and remove the battery and
TEMPERATURE TOO
let the camcorder cool down before resuming use.
HIGH CANNOT REMOVE
DISC
CANNOT RECORD There is a problem with the disc. Replace the disc.
25
CHECK THE DISC
This message can also appear if condensation has formed. Wait
102
until the camcorder dries completely before resuming use.
The disc's recording surface may be dirty or scratched.
-
To Next Page
Loading...
