129
Custom Picture Settings
Renaming Custom Picture Files
1 Select a custom picture file (A 127).
2 Select > [
/
Custom Picture] > [Edit
/
File] > [Rename] > [Input].
• Enter the desired file name (16 characters long) (A 27).
Protecting Custom Picture Files
Protecting a custom picture file prevents its settings from being accidentally changed.
1 Select a custom picture file (A 127).
2 Select > [
/
Custom Picture] > [Edit
/
File] > [Protect] > [Protect].
•
i
will appear next to the file name.
• To remove the protection, select [Unprotect] instead.
Resetting Custom Picture Files
1 Select a custom picture file (A 127).
2 Select > [
/
Custom Picture] > [Edit
/
File] > [Reset].
3 Select a preset custom picture setting and then select [OK].
• The custom picture file will be reset to the selected values.
Look Files
You can register LUT files created with Blackmagic Design’s DaVinci Resolve as Look Files in the custom picture
file. Using a Look File allows you to adjust the video quality of the recorded video. These adjustments apply also
to proxy clips, photos, and screen/output terminals.
1Insert the SD card with the desired Look File (.cube format, located in the root directory of the SD
card) into the camera’s SD card slot B.
2 Select a custom picture file. (A 127)
3 Select > [
/
Custom Picture] > [Edit
/
File] > [Gamma/Color Space] > Desired option.
4 Select > [
/
Custom Picture] > [Edit
/
File] > [Look File Setup] > [Register].
• The Look Files in the SD card will be displayed.
5 Select the desired Look File.
6 Select the [Gamma/Color Space] setting to use after the Look File is applied.
7 Select [OK] twice.
• The selected Look File will be loaded and registered to the custom picture file.
• The image quality adjustments set in the Look File will be applied, and will appear on the screen.
• When disabling the image quality adjustments set in the Look File, select > [
/
Custom Picture] >
[Edit
/
File] > [Look File] > [Off].
To Next Page
Loading...
