Canon EOS C80 - Recording Remotely Using the Remote Camera Control Application

191
Recording Remotely Using an XC Protocol Compatible Controller/Application
Recording remotely using the Remote Camera Control Application
During recording, you can check the angle of view using Live View and adjust various picture related settings.
For details about connection/setup and the Remote Camera Control Application, refer to the Remote Camera
Control Application manual.
NOTES
• The following functions are not available when operating the camera from the Remote Camera Control
Application.
-Menu
[Camera Power]
[Save Camera Settings]
[Operational Settings]:
[Keyboard Shortcuts] > [Pan Left], [Pan Right], [Tilt Up], [Tilt Down], [Pan/Tilt Left and Up],
[Pan/Tilt Right and Up], [Pan/Tilt Left and Down], [Pan/Tilt Right and Down],
[Pan/Tilt Speed +], [Pan/Tilt Speed -], [Prepare Trace], [Execute Trace]
[PTZ Direction Settings]
[Preset/Trace Settings]:
[Preset] > [Preset List] > [Preset Name]
[Trace]
[Camera Settings Page]
[Register] > [Create/Update Thumbnail]
- Camera controls
[Basic] tab:
[PTZ/Focus] > [Pan/Tilt Speed], [Pan/Tilt]
[Preset] > [Speed Level]
[Exposure] > Modes other than (manual exposure).
[Exposure] > [ND filter] > [Auto]
[White Balance] > [R Gain], [B Gain]
[Trace]
[Details] tab:
[Image Quality] > [Knee: Automatic]
[Exposure] > [Infrared], [Enhanced ND Filter]
[Other Functions] > [Wiper]
[Crop]
• Even when camera operation is disabled by key lock, operation is possible using the Remote Camera Control
Application (A 15).
• When adjusting custom picture related settings, refer to About changing custom picture related settings
(A 190).