Recording Remotely Using an XC Protocol Compatible Controller/Application
192
Recording remotely using Multi-Camera Control
You can use a smartphone connected to the same network as the camera to remotely operate the camera and
record video. During recording, you can check the angle of view using Live View and adjust various picture
related settings.
1Install Multi-Camera Control on your smartphone.
• Download and install Multi-Camera Control from the App Store.
• There is no need to repeat this step after the first time.
2 Connect the smartphone to the same network (access point) as the camera.
• For details, refer to the smartphone's instruction manual.
3 Activate the desired network connection (A 166).
• Select a connection setting with the [Canon App] function setting.
4 Open Multi-Camera Control on the smartphone.
5 Operate the smartphone to connect to the camera.
6 Operate Multi-Camera Control on the smartphone to record remotely.
7 When you finish the procedure, set > [ Network Settings] > [Network] to [Disable].
• You can also set > [ Network Settings] > [Connect] to [Disconnect].
• Even when camera operation is disabled by key lock, operation is possible using the Multi-Camera Control
(A 15).
To Next Page
Loading...
