COPYRIGHT
©
1999 CANON INC. CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 INTRODUCTION
1-11
No. Key name Function outline
[1] Display contrast VR Adjusts the control panel contrast.
[2] Collate key Performs sort copying when copying with the ADF.
[3] Copy special features Performs frame erasing, margin, transferring and 2 in 1
copying.
[4] COPY Changes over to the copy mode.
[5] FAX* Changes over to the fax mode.
[6] PRINT/SCAN* Changes over to the printer mode.
[7] Display selection Selects functions shown in the display.
[8] Return Returns to the previous display.
[9] Set Confirms the registration/setting.
[10] Fax Monitor* Confirms the transmission conditions, clears transmission
reservations.
[11] Program* Registers a single operation that can be selected by simply
pushing this key.
[12] Coded Dial* Uses speed dial.
[13] Hook* Ability to listen to the other party’s response through the
speaker.
[14] R* Press to dial an outside telephone number, or an extension
number, when the fax is connected through a swichboard
(PBX).
[15] Redial* Redials the last number dialed.
[16] Stamp* Stamps a completed transmission.
[17] Direct TX* Executes direct transmission.
[18] Reset Resets the copy mode.
[19] Data registration Calls up the user mode setting display.
[20] Numeric key Dials the telephone number, sets the number of copies, etc..
[21] Clear Clears the registration/setting.
[22] Start Starts transmission / copying.
[23] Stop Stops transmission / copying.
[24] Energy saver Clears the energy saver mode.
[25] One touch panel* One touch dial key.
*: Not available on copiers not equipped with the fax function
**: Not available on copiers not equipped with the printer function
To Next Page
Loading...
