Canon GP160DF - Basic Operation; Advanced Features; Chapter 2 Basic Operation

COPYRIGHT © 1999 CANON INC. CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 INTRODUCTION
1-13
B. Basic operation
The basic operations of the copy keys on the operation panel are listed below.
Table 1-401
C. Advanced features
The basic operations of the advanced copy feature keys on the operation panel are
listed below.
Table 1-402
Key name
Reproduction ratio key
Paper selection key
Scanning mode key
Details
Selects fixed ratio change (2R2E) or zoom (50 to 200%).
Selects the pick-up cassette.
Selects the scanning density (automatic, F1 to F9) and the
image quality (character, character/photo, photo).
Key name
Page separation
Binding margin
Frame erasing
Document frame
erasing
Sheet frame
erasing
Book frame
erasing
Punch hole
erasing
2 in 1 copy
Details
Performs left/right page separation copy in the book mode.
Sets the left and right margins and designates the 2-page
spread copy size.
Creates a binding margin on the paper. Sets the margin
position (left margin, right margin, top margin, bottom mar-
gin) and also the margin width (1 to 10mm).
Sets the frame erasing position.
Copies with document frame erasing.
Creates a margin around the outside of the document and
copies.
When copying books, etc., the surrounding and center
margins are deleted.
Erases punch holes from the left margin of copied docu-
ments.
Inputs the document size and paper size and designates 2
in 1 copying.