Canon GP160DF - Functions

4-50
CHAPTER 4 SERVICE MODE
7. Printer parameter settings (#7 PRINTER)
a. #1 SSSW setting
#7 PRINTER- #1 SSSW-SW05 (reduction, cassette selection setting)
Table 4-23
[Bit 0]
Use it to specify whether to give priority to LTRR over LTRR or LGL when data which
may be printed on either by division is received
[Bit 1]
Use it to specify whether to give priority to LGL over A4R or LTRR when data which may
be printed on either by division is received
The order of priority will be as follows according to the bit 0 and 1 settings:
If sub scanning is given priority, the order will be LTRR → A4R → LGL even when bit 1
and 0 are set to 0.
[Bit 2]
Selects whether or not to output a report in a cassette other than the one selected when
a cassette is specified for report output by user data but there is no paper in the speci-
fied cassette.
SW
No.
Bit
No.
Function
05
0 Priority on LTR
Bit setting
10
Ye s N o
1 Priority on LGL Yes No
2 Report output when report paper has run out Do not output
Cassette output
from other than the
specified cassette
3 Reserved
4 Reserved No Yes
5 Reduction and printing on LTR
6 Cassette when report cassette is specified Set Do not set
7 Sub-scanning priority record Set Do not set
Bit 1
0
0
1
1
Bit 0
0
1
0
1
Order of priority
A4R → LTRR → LGL
LTRR → A4R → LGL
LGL → LTRR → A4R
LTRR → LGL → A4R