Canon GP160DF - Parameter Settings; SSSW Settings

E. Parameter settings
1. SSSW settings
The registration and setting items on this switch are composed of 8 bit switches.
The bit switches indicated on the display are as shown below. Each bit is set to 0 or 1.
Figure 4-8
Information about the bit switches is displayed in the table below.
Table 4-1
CHAPTER 4 SERVICE MODE
4-24
SW01
0 0 0 0 0 0 0 0
Bi t 7 Bi t 6 Bi t 5 Bi t 4 Bi t 3
Bi t 2
Bi t 1
Bi t 0
0
1
2
3
4
5
6
7
Bit Function
Service error code
Error dump list
Secret ID number when confidential
reception image is forwarded
according to confirmation of memory
contents
Reserved
Reserved
Reserved
Date & Time setting restriction
Restrict user settings
Output
Output
Do not input
Setting restricted
Setting possible
Not output
Not output
Input
Setting possible
Setting restricted
Indicates that this is
the initial value.
1
0
Indicates setting is 1.
Indicates setting is 0.