#1 SSSW-SW01: Error, copy management
Table 4-2
[Bit 0]
Service error code output selection. When “output” is selected, the service error code is
indicated on the display and in the report.
[Bit 1]
Error dump list output selection. When “output” is selected, an error dump list is attached
to the error transmission report and the reception results report at the time of the error,
and output.
[Bit 2]
Selects whether or not to input the secret code when confidential reception images are
forwarded by using the memory reference button, or when the images are deleted or
printed. When “do not input” is selected, the confidential reception image will be forward-
ed, deleted or printed, without the secret code being input.
[Bit 6]
When “Setting restricted” is selected, certain items can not be set by the user, depend-
ing on the country setting.
When “Setting possible” is selected, all items are user selectable, regardless of the
country type setting.
[Bit 7]
When “setting restricted” is selected, certain items can not be set by the user, depend-
ing on the country setting.
When “setting possible” is selected, all items are user selectable, regardless of the
country type setting.
CHAPTER 4 SERVICE MODE
4-25
SW
No.
Bit
No.
Function
01
0 Error code for service engineer
Bit setting
10
Output Do not output
1 Error dump list Output Do not output
2
Secret code function when confidential recep-
tion image is forwarded by to the memory man-
agement function
Do not input Input
3 Reserved
4 Reserved
5 Reserved
6 Date & Time setting restriction
Setting restricted
Setting possible
7 Restrict user settings
Setting possible
Setting restricted
To Next Page
Loading...
