#1 SSSW-SW08: closed connection ID settingClosed network connection ID bit 7
Table 13-510
When using closed network connection function, set these switches to the same ID
as the other party’s machine.
COPYRIGHT
©
1999 CANON INC. CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
13-88
SW
No.
Bit
No.
Function
08
0 Closed network connection ID bit 0
Bit setting
10
1 Closed network connection ID bit 1
2 Closed network connection ID bit 2
3 Closed network connection ID bit 3
4 Closed network connection ID bit 4
5 Closed network connection ID bit 5
6 Closed network connection ID bit 6
7 Closed network connection ID bit 7
To Next Page
