Canon GP160DF - Page 550

4-48
CHAPTER 4 SERVICE MODE
#4A SPECIAL-SW04: Completion tone settings
Table 4-22
[Bit 1]
Sets whether or not to ring the completion tone when receiving is finished when receiv-
ing from memory.
[Bit 2]
Sets whether or not to ring the completion tone when received image printing is fin-
ished.
SW
No.
Bit
No.
Function
04
0 Setting prohibited
Bit setting
10
1 Completion tone when receiving from memory Ring Do not ring
2 Receiving print completion tone Ring Do not ring
3 Setting prohibited
4 Setting prohibited
5 Setting prohibited
6 Setting prohibited
7 Setting prohibited