Canon imageCLASS D570 - Page 195

Viewing WEP and WPA/WPA2-PSK information
1
Select <Security Settings>, and press .
2
Conrm and select the current security setting, and press .
● If the security settings are not congured, <None> is displayed.
3
Select the setting to view, and press .
WEP WPA/WPA2-PSK
● <Wireless LAN Status> and <Latest Error Information> can be viewed from . Press
<Network Information> <Network Connection Method> and select the setting to view.
LINKS
Connecting to a Wireless LAN(P. 163)
Setting IPv4 Address(P. 181)
Setting IPv6 Addresses(P. 184)
Conguring DNS(P. 205)
Network
189