Canon imageCLASS D570 - Page 202

4
Click [Add] [Finish].
5
Click [Close].
Changing the port type or number
If the printing protocols ( Conguring Printing Protocols and WSD Functions(P. 191) ) or port numbers
( Changing Port Numbers (P. 234) ) have been changed on the machine, the corresponding settings on
the computer must also be congured. This change is only available for LPR or RAW ports.
1
Click [Congure Port].
2
Click the [LPR] or [RAW] radio button in [Protocol Type], change the number in the [Port Number] text box
as necessary, and then click [OK].
4
Click [Close].
LINKS
Setting Up Print Server(P. 197)
Network
196