Canon imageCLASS MF4890dw - Place Documents

19
Basic Operation
Place Documents
Choose the appropriate way to place documents according to the document’s type.
Check available documents
MF4890dw MF4880dw/MF4770n
Size (Width X Length)
81/2"
(216mm)
81/2"
(216mm)
51/2"
(140mm)
51/2"
(140mm)
5"(127mm)
5"(127mm)
14"(356mm)
14"(356mm)
81/2"
(216mm)
81/2"
(216mm)
57/8"
(148mm)
57/8"
(148mm)
41/8"(105mm)
41/8"(105mm)
14"(356mm)
14"(356mm)
Capacity (For 21 lb Bond (80 g/m²))
Weight
1-sided document
1-sided document
13.3 to 27.9 lb Bond (50 to 105 g/m²)
13.3 to 27.9 lb Bond (50 to 105 g/m²)
2-sided document
2-sided document
16.0 to 27.9 lb Bond (60 to 105 g/m²)
16.0 to 27.9 lb Bond (60 to 105 g/m²)
1-sided document
1-sided document
13.3 to 27.9 lb Bond (50 to 105 g/m²)
13.3 to 27.9 lb Bond (50 to 105 g/m²)
Check available documents
Size (Width X Length)
81/2"
(215.9mm)
113/4"(297mm)
Maximum
Weight
Maximum 4.4 lb (2 kg)
Capacity
1 sheet
When placing non-standard documents
such as heavy paper, small paper, or
booklets:
Use the platen glass. (→p.20)
When placing multiple documents
of plain paper in the same size,
thickness, and weight:
Use the feeder. (→p.20)
50 sheets
50 sheets
35 sheets
35 sheets
Min.
Min.
Min.
Min.
Max.
Max.
Max.
Max.
IMPORTANTIMPORTANT
• Place a document after glue, ink, or correction  uid on the document is completely dry.
• To prevent paper jams in the feeder, place a document on the platen glass when using the following types of
paper:
- Wrinkled or creased paper
- Carbon paper or carbon-backed paper
- Curled or rolled paper
- Torn paper
- Thin paper
- Documents with staples or paper clips attached
- Transparency
Downloaded from ManualsPrinter.com Manuals