64
Receive a Fax from Memory
If a fax is stored in memory, you can view the sender of the received fax and print or forward
the fax.
Switching to Memory Lock Mode
1
Press [ ] (Menu).
2
Press [▲] or [▼] to highlight <System Settings>, and then press [OK].
3
Press [▲] or [▼] to highlight <Communication Management Settings>,
and then press [OK].
4
Press [▲] or [▼] to highlight <Memory Lock Settings>, and then press
[OK].
5
Press [▲] or [▼] to highlight <On>, and then press [OK].
6
Set the details as needed.
<Memory Lock
PIN>
Register a seven-digit PIN to protect the memory lock
set
tings.
You can use numbers between "0" and "9," but
cannot register consecutive digits that consist of
only "0" as a PIN.
<Report Print>
Set the RX Result Report to print automatically when faxes
ar
e received into the memory.
• <O >: Do not print the RX Result Report.
• <On>: Print the RX Result Report.
To use this feature, you must also activate the
<RX Result Report> item:
[ ] (Report) <Report Settings>
<RX Result Report>
The default setting is <O >.
<Memory Lock
Time>
Set th
is feature to receive faxes into the memory only for a
speci ed time. When the preset time starts, the machine is
switched to receive fax into the memory. When the preset
time ends, faxes stored in the memory are automatically
printed and the memory receiving feature is deactivated.
7
After you have speci ed the setting, press [▲] or [▼] to highlight
<Apply>, and then press [OK].
8
Press [ ] (Menu) to close the screen.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
