Canon imagePRESS 1135 User Manual

4
4
4-158
4-158
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Primary Charging Assembly
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Primary Charging Assembly
Removing Primary Charging Assembly
<Preparation>
1) Open the Front Left Cover and the Front Right
Cover.
(Refer to page 4-54)
Caution :
When replacing this part, be sure to
perform the “operation after replacing
the primary charging assembly, the
primary charging wire and the grid
wire”.
Caution :
Do not touch the grid of the
primary charging assembly.
Grid
F-4-300
1) Loosen the screw and remove the primary charging assembly cover.
MEMO :
When removing the
primary charging
assembly only,
remove the primary
charging assembly
cover.
Primary charging assembly
F-4-301

Canon imagePRESS 1135 Specifications

General

Print Speed (Black)	135 ppm
Print Resolution	1200 x 1200 dpi
Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Operating System Compatibility	Windows, macOS, Linux
Print Technology	Laser
Maximum Paper Size	13 x 19.2 inches
Network Connectivity	Ethernet, USB
Supported Media Sizes	A4, A5, B5, Custom sizes
Supported Media Types	Plain paper, Heavy paper, Coated paper, Envelope