1
1
1-30
1-30
Product Overview > Operation > Control Panel
Product Overview > Operation > Control Panel
When executing shutdown, the inner machine is doing cool down period. It is to prevent
image troubles, such as toner deterioration or coagulation that can cause the
image's color become pale, the image ow, etc. The time necessary for shut down
process is longest 60 minutes.If shutdown processing is executed, main power supply will
automatically switch off.
The difference with other product, there is no "Main Power Forced OFF" function during
shut down process executing. "Forced OFF" button is not in the display.
If during one-day span users repeatedly perform forced-switch-OFF, the cool down
process inside the machine cannot perform well, thus the previously described
trouble might occur. Explain the importance of machine cool down in the shutdown
process, and
when the shutdown process is completed, the main power supply will automatically
switch off. And instruct the user not to switch off the main power supply manually during
shutdown process.
Concerning main power supply OFF during regular service
When switching off the main power supply during regular service (installation, periodical
maintenance, etc), after shutdown process start, wait until the above screen
appears, then switch off the main power supply manually.
• If the main power supply is shut down before the above screen appears, HDD trouble
might occur.
• If you frequently and manually turn off the main power switch in a day while you draw
the îš¿xing/feed unit, the foregoing image error can be prevented.
Before you turn on the main power switch again, make sure that the main power indicator
on the operation panel is turned off. If the main power indicator is lit, this means that the
power of the machine is turned on.
5) When the shutdown process is completed, main power supply will automatically switch
off.
F-1-16
Control Panel
1 2 3
4 5
6
7
8
9
0
ID
C
?
Execute/Memory Error
[5]
[6]
[7]
[8]
[9]
[10][11][12][13][14][15]
[1] Execute/Memory lamp [9] Main Power lamp
[2] Error lamp [10] Stop key
[3] Counter Check key [11] Start key
[4] Power save key [12] Reset key
[5] Control Panel Power Switch [13] ID (Log In/Out) key
[6] Additional Functions key [14] Help key
[7] Numeric keys [15] Touch Panel Display
[8] Clear key
F-1-17
To Next Page
Loading...
Need help?
General
