2
2
2-31
2-31
Technology > Image Formation System > Overview > Speciîš¿cations
Technology > Image Formation System > Overview > Speciîš¿cations
Image Formation System
Overview
This machine forms a toner image by magnetic one-component developing.
It uses new technologies of a twin developing method to ncrease development efîš¿ciency and
an intermediate transfer method to support high-speed printing of thin paper.
Developing assembly
Laser
ITB cleaning unit
Secondary transfer external roller
Secondary transfer
internal roller
Primary charging unit
Drum cleaning unit
Patch sensor
Photosensitive
drum
ITB unit
ITB
Primary transfer roller
Developing cylinder
Paper
F-2-35
â–
Speciîš¿cations
Item Function
Photosensitive drum Material A-Si
Drum diameter φ108
Cleaning Cleaning blade
Process speed 665mm/sec
Drum HP detection Provided
Developing assembly Developing cylinder Two cylinders (twin developing)
Developing method Dry one-component jumping development
Toner Magnetic negative toner
Toner level detection Provided (Piezo sensor)
Primary charging unit Charging method Corona method
Toner container Amount of toner îš¿lled Approx 2.3kg
Toner level detection Provided (Piezo sensor)
Transfer method Intermediate transfer (ITB)
ITB unit Material PI (Polyimide)
Rim length 701.5mm
Cleaning Cleaning blade
Belt displacement
collection
Provided (Piezo sensor)
Primary transfer Transfer method Transfer roller (Sponge)
Secondary transfer roller Transfer method Transfer roller (Sponge)
Disengage Mechanism Provided
Cleaning Static cleaning
Separation method Curvature separation + Static eliminator
Patch sensor Provided (ITB unit)
T-2-27
To Next Page
Loading...
Need help?
General
