Canon imagePRESS 1135 User Manual

4
4
4-177
4-177
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Pre-Primary Transfer Charging Assembly
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Pre-Primary Transfer Charging Assembly
Removing Pre-Primary Transfer Charging Assembly
<Preparation>
1) Open the Front Left Cover and the Front Right
Cover.
(Refer to page 4-54)
Caution :
When replacing this part, be sure to
perform the “operation after replacing
the pre-primary transfer charging
assembly and the pre-primary transfer
charging wire”.
1) Loosen the screw and remove the pre-primary transfer charging assembly cover.
MEMO :
When removing the pre-
primary transfer charging
assembly only, remove
the cover of the pre-
primary transfer charging
assembly.
Pre-primary transfer
charging assembly
cover
F-4-348
2) Release the release lever of pre-primary transfer charging assembly and pull out the pre-primary transfer charging assembly.
Release lever
Pre-primary transfer charging assembly
F-4-349

Canon imagePRESS 1135 Specifications

General

Print Speed (Black)	135 ppm
Print Resolution	1200 x 1200 dpi
Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Operating System Compatibility	Windows, macOS, Linux
Print Technology	Laser
Maximum Paper Size	13 x 19.2 inches
Network Connectivity	Ethernet, USB
Supported Media Sizes	A4, A5, B5, Custom sizes
Supported Media Types	Plain paper, Heavy paper, Coated paper, Envelope