Canon imagePRESS 1135 User Manual

7
7
7-188
7-188
Error Code > Alarm Code > Alarm Code Details
Error Code > Alarm Code > Alarm Code Details
Alarm Code
Alarm Code Details
Location Code Description Detailed description
00
-
0246 Error code display (4-digit) Fails to write into software counter PCB.
00
-
0247 Error code display (4-digit) Fails to repair the data of software counter.
02
-
0020 Front side DADF dust
correction occurs
Set : If there is DADF dust correction in the front
side roller during DADF between sheet.
02
-
0021 Back side DADF dust
correction occurs
Set : If there is DADF dust correction in the back
side roller during DADF between sheet.
04
-
0001 At ACC connection, re-
pickup does not work
normally (full).
04
-
0002 At ACC connection, re-
pickup does not work
normally (no paper).
04
-
0037 POD: Upper deck lifter
motor does not descend.
Operation: Upper deck is not used/upper deck lifter
motor is stopped.
How to release: Turn OFF/ON to release
04
-
0038 POD: Lifter lower limit
sensor of upper deck is
broken.
(Lifter does not descend.)
Operation: Upper deck is not used/upper deck lifter
motor is stopped.
How to release: Turn OFF/ON to release
04
-
0039 POD: Upper deck lifter
motor does not ascend.
Operation: Upper deck is not used/upper deck lifter
motor is stopped.
How to release: Turn OFF/ON to release
04
-
0040 POD: Lifter lower limit
sensor of upper deck is
broken.
(Lifter does not ascend.)
Operation: Upper deck is not used/upper deck lifter
motor is stopped.
How to release: Turn OFF/ON to release
04
-
0041 POD: Paper surface sensor
of upper deck is broken.
Operation: Upper deck is not used/upper deck lifter
motor is stopped.
How to release: Turn OFF/ON to release
04
-
0042 POD: Lifter upper limit
sensor of upper deck
exceeds the upper limit.
Operation: Alarm is displayed while normal
operation is kept.
How to release: Open/close the deck to release
04
-
0043 POD: Lifter lower limit
sensor of upper deck
exceeds the lower limit.
Operation: Upper deck is not used/lifter is lifted to
the lowest position.
How to release: Turn OFF/ON to release
04
-
0044 POD: Remain level count
of upper deck exceeds the
upper limit.
Operation: Upper deck is not used/upper deck lifter
motor is stopped.
How to release: Turn OFF/ON to release
04
-
0045 POD: Remain level count
of upper deck exceeds the
lower limit.
Operation: Upper deck is not used/upper deck lifter
motor is stopped.
How to release: Turn OFF/ON to release
Location Code Description Detailed description
04
-
0046 POD: Supply position
sensor ag of upper deck is
broken.
Operation: Upper deck is not used/upper deck lifter
motor is stopped.
How to release: Turn OFF/ON to release
04
-
0047 POD: Connector of supply
position sensor on upper
deck is disconnected.
Operation: Alarm is displayed while normal
operation is kept.
How to release: Open/close the deck to release
04
-
0048 POD: Connector of right
separation fan on upper
deck is disconnected.
Operation: Upper deck is not used/lifter is lowered
to the lowest position.
How to release: Turn OFF/ON to release
04
-
0049 POD: Right separation fan
of upper deck: end of life/
breakage of fan
Operation: Upper deck is not used/lifter is lowered
to the lowest position.
How to release: Turn OFF/ON to release
04
-
0050 POD: Connector of left
separation fan on upper
deck is disconnected.
Operation: Upper deck is not used/lifter is lowered
to the lowest position.
How to release: Turn OFF/ON to release
04
-
0051 POD: Left separation fan
of upper deck: end of life/
breakage of fan
Operation: Upper deck is not used/lifter is lowered
to the lowest position.
How to release: Turn OFF/ON to release
04
-
0052 POD: Connector of right
oatation fan on upper deck
is disconnected.
Operation: Upper deck is not used/lifter is lowered
to the lowest position.
How to release: Turn OFF/ON to release
04
-
0053 POD: Right oatation fan
of upper deck: end of life/
breakage of fan
Operation: Upper deck is not used/lifter is lowered
to the lowest position.
How to release: Turn OFF/ON to release
04
-
0054 POD: Connector of middle
oatation fan on upper deck
is disconnected.
Operation: Upper deck is not used/lifter is lowered
to the lowest position.
How to release: Turn OFF/ON to release
04
-
0055 POD: Middle oatation fan
of upper deck: end of life/
breakage of fan
Operation: Upper deck is not used/lifter is lowered
to the lowest position.
How to release: Turn OFF/ON to release
04
-
0056 POD: Auto adjustment of
oatation fan is failed on
upper deck.
Operation: Alarm is displayed while normal
operation is kept.
How to release: Turn OFF/ON and readjusted.
04
-
0057 POD: Connector of left
oatation fan on upper deck
is disconnected.
Operation: Upper deck is not used/lifter is lowered
to the lowest position.
How to release: Turn OFF/ON to release
04
-
0058 POD: Left oatation fan
of upper deck: end of life/
breakage of fan
Operation: Upper deck is not used/lifter is lowered
to the lowest position.
How to release: Turn OFF/ON to release
04
-
0059 POD: Side right fan of
upper deck does not rotate:
breakdown
Operation: Upper deck is not used/lifter is lowered
to the lowest position.
How to release: Turn OFF/ON to release
04
-
0060 POD: Left right fan of
upper deck does not rotate:
breakdown
Operation: Upper deck is not used/lifter is lowered
to the lowest position.
How to release: Turn OFF/ON to release

Canon imagePRESS 1135 Specifications

General

Print Speed (Black)	135 ppm
Print Resolution	1200 x 1200 dpi
Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Operating System Compatibility	Windows, macOS, Linux
Print Technology	Laser
Maximum Paper Size	13 x 19.2 inches
Network Connectivity	Ethernet, USB
Supported Media Sizes	A4, A5, B5, Custom sizes
Supported Media Types	Plain paper, Heavy paper, Coated paper, Envelope