Canon imagePRESS 1135 User Manual

4
4
4-181
4-181
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Replacing Pre-Primary Transfer Charging Wire
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Replacing Pre-Primary Transfer Charging Wire
Replacing Pre-Primary Transfer Charging Wire
<Preparation>
1) Open the Front Left Cover and the Front Right Cover.
(Refer to page 4-54)
2) Remove Pre-Primary Transfer Charging Assembly.
(Refer to page 4-177)
3) Remove Pre-Primary Transfer Charging Wire Pad Holder.
(Refer to page 4-178)
4) Remove Pre-Primary Transfer Charging Wire Slider.
(Refer to page 4-180)
Caution :
When replacing this part, be sure to perform the “operation after replacing the pre-
primary transfer charging assembly and the pre-primary transfer charging wire”.
1) Remove the 2 covers.
Cover
F-4-356
Caution :
Be careful not to touch the charging wire with hands directly.
Charging wire
F-4-357
2) Pick the leading edge of spring with tweezers and remove it from the hook.
3) Remove the charging wire from the groove on the sponge.
F-4-358

Canon imagePRESS 1135 Specifications

General

Print Speed (Black)	135 ppm
Print Resolution	1200 x 1200 dpi
Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Operating System Compatibility	Windows, macOS, Linux
Print Technology	Laser
Maximum Paper Size	13 x 19.2 inches
Network Connectivity	Ethernet, USB
Supported Media Sizes	A4, A5, B5, Custom sizes
Supported Media Types	Plain paper, Heavy paper, Coated paper, Envelope