EasyManua.ls Logo

Canon imagePROGRAF iPF6400SE - Page 367

Canon imagePROGRAF iPF6400SE
684 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Insert the edge of the roll in the Paper Feed Slot (a)
and advance the roll until you hear the feed tone.
Important
Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the printing
quality. We recommend wearing clean cloth gloves when handling rolls to protect the printing surface.
If the paper is wrinkled or warped, straighten it out before loading it.
Load paper straight so it is not fed askew.
6
Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and the
barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.") P.373
ManageRe-
mainRoll
Barcodes Printer Operation After the Paper is Fed
Off Printed A menu for selection of the type of paper is shown on the Display Screen.
Press or to select the type of paper, and then press the OK button.
Not printed
On Printed The type and amount of paper left is automatically detected based on the barcode printed on the roll.
There is no need to specify the type and length of the paper.
Not printed A menu for selection of the type and length of paper is shown on the Display Screen.
Press or to select the type and length of paper loaded, and then press the OK button.
Note
For details on types of paper to select, see the Paper Reference Guide. (See "Displaying the Paper Refer-
ence Guide.") P.356
7
Close the Roll Feed Unit Cover.
Important
Cut the edge of the roll using the Paper Cutting function if the edge is creased or soiled. (See "Specifying
the Cutting Method for Rolls.") P.376
Note
Adjusting the printhead alignment with the type of paper to be used in printing may enhance printing quality.
(See "Automatic Adjustment to Straighten Lines and Colors.") P.552
If you set the detection of paper leading edge to Do not perform, a margin of about 23 cm is created at the
paper leading edge when printing starts. (See "Specifying the Cutting Method for Rolls.") P.376
iPF6400SE
Loading Rolls in the Printer
User's Guide
Handling and Use of Paper Handling rolls
367

Table of Contents

Related product manuals