Chapter 6
6-22
T-6-6
T-6-7
A4 GND - GND
A5 SNS3V OUT Power supply (+3.3V)
A6 GND - GND
A7 /LF_HP IN Feed roller HP sensor output signal
A8 N.C.(VM_26V) - N.C
A9 N.C - N.C
A10 N.C - N.C
A11 N.C - N.C
B1 VM_26V OUT Power supply (+26V)
B2 KYUINFAN_ALARM IN Suction fan alarm signal
B3 KYUINFAN_PWM OUT Suction fan duty control signal
B4 VMGND - GND
B5 VM_26V OUT Power supply (+26V)
B6 MISTFAN_R_ALARM IN Mist fan (R) alarm signal
B7 VMGND - GND
B8 VM_26V OUT Power supply (+26V)
B9 MISTFAN_L_ALARM IN Mist fan (L) alarm signal
B10 VMGND - GND
B11 N.C - N.C
J2702
Pin
Number
Signal name IN/OUT Function
1 VM 26V OUT Power supply (+26V)
2 DCOVER_SOL OUT Upper cover lock solenoid (L) drive signal
3 VM 26V OUT Power supply (+26V)
4 DCOVER_SOL OUT Upper cover lock solenoid (R) drive signal
5N.C - N.C
J2801
Pin
Number
Signal name IN/OUT Function
1 LFSP_A OUT Feed motor drive signal A
2 LFSP_VM OUT Power supply (+32V)
3 LFSP_AB OUT Feed motor drive signal AB
4 LFSP_BB OUT Feed motor drive signal BB
5 LFSP_VM OUT Power supply (+32V)
J2701
Pin
Number
Signal name IN/OUT Function
To Next Page
Loading...
