7
Holding the Roll Holder flange (a), remove the holder
from the Roll Holder Slot.
Note
• For instructions on removing the Roll Holder from rolls, see "Removing the Roll Holder from Rolls."
→
P.548
8
Lower the Ejection Guide and close the Top Cover.
Note
• To load new paper in the printer at this point, see "Loading Rolls in the Printer."
→
P.539
• Clean inside the top cover before loading paper.
(See "Cleaning Inside the Top Cover.")
→
P.943
iPF8400
Removing the Roll from the Printer
User's Guide
Handling and Use of Paper Handling rolls
547
To Next Page
Loading...
