Cut Speed
Select auto-cut speed. This can be adjusted when paper cannot be cut precisely with auto-cut.
Printer Default
Settings in printer unit operation panel are applied.
Fast
Select when cut is not smooth with Standard settings.
Standard
Select when there are no particular problems with auto-cut.
Slow
If this is selected for paper with adhesive, the cutter will not stick to the adhesive easily and it will
slow deterioration of the cutter's capabilities.
Unidirectional Printing
Controls color unevenness and unaligned ruled lines.
Please check when printing in one direction.
Calibration Value
The results can be applied when printing in the event color calibration was set in printer unit. Please
select Use Value when applying calibration.
Mirror
Select whether to print reflected image or not. When you select this check box, text and images will
be printed as if reflected in a mirror.
Custom dialog box
Set the quality level, and select the desired print quality.
Quality
You can use the slider bar to adjust the print quality level.
Important
• Certain print quality levels cannot be selected depending on the settings of Media Type.
Note
•
The High, Standard, or Fast print quality modes are linked with the slider bar. Therefore when
the slider bar is moved, the corresponding quality and value are displayed on the left. This is the
same as when the corresponding quality is selected for Print Quality on the Main tab.
View Settings dialog box
Print Target
Select the print purpose. The settings of the selected print purpose are displayed in Details.
Name
Displays the name of the selected print purpose.
Details
Displays the settings of the print purpose that was selected for Print Target.
223
To Next Page
Loading...
Need help?
General
Weight and Dimensions
