14.
Insert the edge of the roll in the feed slot (A) and advance the roll until you hear the feed
14.
tone.
Important
• If the leading edge of the paper is stuck to the roll and difficult to insert into the feed slot, pull out•
the roll slightly before inserting the edge into the feed slot.
• Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect•
the printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the
printing surface.
15. After paper feeding has started, do the following operations based on the Manage15.
remaining roll amount setting and the barcode printed on the roll paper.
Keeping Track of the Amount of Roll Paper Left
•
When selecting Disable or Auto estimate in Manage remaining roll amount.
•
◦
When selecting Manual or Auto with confirmation in Media type selection method.
◦
A menu for selecting the media type appears on the touch screen. Operate the touch screen
and select the media type to be used.
◦
When selecting Auto detect in Media type selection method.
◦
You'll see candidate for the media type you've estimated to the touch screen. After 5 seconds,
the paper type of the first item is selected. If you choose a different candidate, you can use the
touch screen to select the type of paper you want.
261
To Next Page
Loading...
Need help?
General
Weight and Dimensions
