Printing on Plain Paper / Heavy Paper / Label / Transparency
2-20
Loading and Delivering Paper
2
6
Press down the paper stack as shown in the figure, then make
sure that it does not exceed the load limit mark and that it is
loaded under the hooks on the paper guides.
Make sure that there is sufficient space between the hooks and paper stack.
Take out some paper when there is no space.
IMPORTANT
The following shows the cassette capacity. Be sure that the paper stack does not
exceed the load limit mark of the paper guide. If the paper stack exceeds the load
limit mark, this may result in misfeeds.
- Plain paper Approx. 250 sheets (64 g/m
2
)
- Heavy paper Approx. 100 sheets (128 g/m
2
)
-Transparency Approx. 100 sheets
- Label (label standard card) Approx. 100 sheets
Load limit mark
Hooks
Hook
Hook
Load limit mark
To Next Page
Loading...
